Hello friends, in this post I want to share: Calculation of the Metric Helical Bevel Gear. This is a topic that has been asked frequently on my YouTube channel and despite not having had the opportunity to manufacture a gear … Continue reading →

Below, I share with you a ISO Metric Thread Pitch Table Chart. It includes the thread, the nominal bolt diameter (D), the pitch (p), the drill bit diameter (Db) for making nuts, the thread depth (H), the double thread depth, … Continue reading →

Hello friends, in this post I want to share with you information and a table chart for the dividing head.Below I show a Division Table Chart for the Dividing Head considering the following aspects: In the table chart, we have … Continue reading →

Hello Friends, in the workshop it’s very useful to have certain information and in this post I want to share with you a Table chart with Conversion of Inch Fractions to Thousandths of an Inch which can save you time … Continue reading →

Metric Trapezoidal Thread has a tooth profile of 30°, it is metric, so it uses the standard of the pitch, therefore this value along with the tooth profile angle are the only data we will need to calculate all the … Continue reading →

A very interesting topic, really this is not as complicated as it seems, and there is a simple method to know which drill bit to use for making internal threads with a tap. I remember very well that when I … Continue reading →

To convert Thousandths of an Inch to Inch Fractions and vice versa, there are several paths, in this article I share the easiest path. Part 1. Converting Thousandths of an Inch to Inch Fraction. Procedure: Example: Convert the value 0.46875 … Continue reading →